4 Channel 1080P Car DVR with GPS
4 Channel Car DVR with GPS
F4 is a 4-channel Car DVR terminal that integrates 4G communication, GNSS positioning, ADAS advanced driving assistance system, DMS driver monitoring system, supporting 4-channel audio and video recording, SD card and hard disk storage, driving data recording, bidirectional calls initiated by the monitoring end, real-time monitoring, and other functions.
Car DVR Features
- ADAS+DMS+BSD
Integrates ADAS advanced driving assistance system, DMS driver monitoring system, BSD blind spot monitoring system.
- High Definition Video
Supports 4-8 channels of 720P (1280*720) or 1080P (1920*1080).
- Real-time Location Monitoring
Reports longitude, latitude, speed, etc., according to the set transmission time interval.
- Large Capacity Storage
Supports simultaneous use of 1 2.5-inch hard disk and 1 SD card for cyclic storage.
- Linked Alarms
Supports signal-linked trigger alarms and three-urgent linked alarms. Automatically uploads videos or photos when danger occurs.
- Built-in Driving Recorder
Built-in driving recorder, also known as the car's "black box." Provides important evidence for accident liability determination.
- Rich Expansion Interfaces
Supports external connection of peripherals such as oil rods, advertising screens, fare meters, evaluators, roof lights, safety modules, etc., through the pass-through port.
- Data Security
In case of disk failure or vehicle collision, uploads video to the cloud about 10 seconds before the failure, ensuring that important videos are not lost.
- Widely Used in
Taxi, ride-hailing, freight, engineering fleet, etc.
Car DVR Specifications
Item | Detailed Specification |
Appearance structure | Size: 145×58×193mm Shell material: PC+ABS, body material: aluminum alloy |
Protection grade | IP54 |
Environmental suitability | Operating temperature: -30℃～70℃, Storage temperature: -40℃～85℃ |
Working voltage | Working voltage range: 9 - 32V |
Support car battery protection: 8.5V±0.5V/12V system, 17V±0.5V/24V system | |
12V/24V adaptive，36V system is not supported | |
Ultra-low power consumption design | Static current <2mA Support zero- power-consumption sleep mode |
Power consumption | Average power consumption is less than 30W |
Super capacitor | 3 super capacitors can supply power to the system and camera |
2~3s to save the complete video before power failure | |
Indicator lights | 4 lights (1 positioning signal, 1 communication signal, 1 video recording, 1 terminal operation indication) |
External interface | Power supply: TE-1318384-2 |
Positioning antenna connector: Fakra-C blue | |
Communication antenna connector: Fakra-D | |
Video interface: M12-4 | |
IPC interface: M12-6 | |
Video | Maximum 6 channels of AHD/CVBS video input, can supply power to the camera, the output voltage value is 12V, single channel maximum output current 0.5A |
1-channel IPC video input connector, 12V power supply | |
1-channel CVBS output | |
Audio | 2-way camera recording, recording line supports key input detection |
1 way shout MIC input | |
Storage | 2.5-inch mechanical / solid state hard disk, can support 7mm / 9.5mm, hard disk shock absorption device fixed in the terminal (Maximum capacity support 2TB) |
2 SD cards, pluggable mode, does not support simultaneous recording (Maximum capacity support 512GB) | |
Data interface | 2-way RS232 interface, 5V power supply @ 500mA |
1-way 485 interface, 1 way IPC interface, 12V power output (1A) | |
Positioning module | GPS and BeiDou positioning module |
Communication module | 4G module |
SIM card | Drawer plug-in SIM card |
IO function | 8-channel input: ACC, left steering, right steering, door edge, emergency, reverse, brake, speed pulse |
1 way output: fuel break power |
