DSM HD 720P camera

Y10
The DSM HD camera 720P 'Y10' is an AI device developed by Yuwei based on image recognition technology. Equipped with its independently-developed advanced image intelligent processing core algorithm, this device can perform real-time monitoring of the driver's fatigue status and unsafe driving behavior, provide timely voice safety warnings, and report to the management platform. This provides drivers with more proactive and intelligent safety assurance, and reduces the incidence of safety accidents.

Product Features

Function Description

Specification parameters

Product Features
DSM HD 720P camera

GC1054 1/4 inch image sensor

AHD high-definition video output, clear image

High sensitivity

Adaptive 3D digital noise reduction

Adapt to multiple algorithm scenarios

Supports wide voltage supply of DC 9-16V

BMW connector

Adjustable and lockable lens pitch angle

High temperature resistant, suitable for installation in automotive environments

Fixed with 3M adhesive/screws, convenient for installation.

DSM camera installation

During the installation process, please follow the steps below to prevent damage to the camera:

Connect the camera to the terminal to ensure that the camera device captures a normal image.

Place the camera in the desired installation position and adjust the tilt angle of the camera to confirm that the captured image is normal.

Record the installation position and camera calibration.

Maintain the camera at the adjusted angle and use a hex screwdriver to tighten the inner hex screw hole that adjusts the viewing angle.

Remove the protective film from the double-sided adhesive on the camera, and install the camera at the recorded position. Secure it with self-tapping screws.

If there is any deviation in the camera's vertical angle after installation, repeat steps 2, 3, and 4 to fine-tune the tilt angle of the camera.

Function Description

DSM application scenarios:

1. Fatigue driving detection

2. Smoking detection

3. Phone call detection

4. Distracted driving detection

5. Abnormal state detection.



Application scenarios:

Installed in the vehicle, suitable for driver behavior detection.


DSM HD 720P camera

DMS-Fatigued driving 

 DSM HD 720P camera

  DMS-Call

 DSM HD 720P camera

HOD-seat belt detection


DSM HD 720P camera 

BSD(Right)

DSM HD 720P camera

BSD(Forward)

Specification parameters

model

parameter

DSM-A720PS-Y10

Image Sensor

GC1054 1/4 inch

ISP

FH8535L

Pixel size

3.0um*3.0um

field of view

D=70.4°H=58.6°V=36°

focal length

3.94 mm

depth of field

200cm~∞

Effective Pixels

1280(H)x720(V)

video output

AHD 720p

Frame rate

25fps

System format

Default PAL format (black and white image)

wide dynamic range

70.7dB

signal-to-noise ratio

41.4dB

Infrared effective distance

0-1.2M

Audio

none

Operating temperature

- 20 ℃~70℃

storage temperature

- 30 ℃~ 80 ℃

Working humidity

Relative humidity below 90%

Power - Current

DC12V, 100mA

Power consumption

About 1.2W

cable length

Tail line 880 cm± 50mm


Product recommendations

Last:
DSM camera HD
×
dash cam
Menu
MESSAGE
*
*
*