Are Dash Cams Good for Fleet Vehicles?
Are Dash Cams Good for Fleet Vehicles
YUWEI’s dash cams are purpose-built for fleet management, integrating GPS/BDS positioning, ADAS (Advanced Driver Assistance System), DMS (Driver Monitoring System), 4G connectivity, and cloud video storage. They provide a comprehensive, intelligent solution for modern fleet operations.
Real-Time Control, Smart Fleet Management
With GPS tracking and real-time video streaming, YUWEI fleet dash cams help you:
1. Monitor fleet operations in real-time
2. Dispatch efficiently and optimize routes
3. Respond quickly to incidents
4. Enhance driving safety
5. Manage everything from a centralized platform
Fleet Dash Cam Features
GPS Tracking
Track vehicle locations in real-time, gain full visibility into fleet movements, optimize routes, and improve operational efficiency.
Instant Alerts
Get automatic alerts for hard braking, speeding, collisions, and other critical events to ensure timely response and enhanced safety.
Cloud Connectivity
Access fleet data anytime, anywhere through the cloud platform to make informed decisions remotely.
Speed Monitoring
Monitor driving behavior, prevent violations, and promote safer driving habits.
Trip History Logs
Detailed driving and route data for performance evaluation and improved dispatch planning.
Safety Scoring System
AI-powered scoring of driver safety, offering personalized improvement suggestions to reduce accident rates.
Live Video Streaming
View live video of driver behavior and vehicle status to ensure full situational awareness and fast incident resolution.
AI-Enhanced Support: The Ideal Choice for High-Performance Fleets
YUWEI's ADAS series is powered by advanced AI chips, combining ADAS and DMS features to help fleets:
1. Reduce accident rates
2. Identify risky behaviors
3. Provide real-time feedback and coaching to drivers
4. Boost productivity and revenue
Product Highlights
1. Ultra-Clear Imaging: Dual HD cameras (front and cabin) with night vision and WDR (Wide Dynamic Range)
2. Two-Way Audio: Built-in microphone and speaker for remote communication and alerts
3. Plug & Play Setup: Simple 15-minute installation to minimize vehicle downtime
4. Real-Time AI Analysis: Detects fatigue, distraction, and other high-risk behaviors
5. Remote Access & Playback: Easily access live or recorded footage from anywhere
6. Broad Compatibility: Seamlessly integrates with various fleet management platforms
Fleet Dash Cam Specifications
Product model: V8N | |
system | Embedded Linux |
4G | LTE-FDD: B1/ 3/ 5/ 7/ 8/ 20/ 28 |
LTE - TDD : B38/ 40/ 41 | |
WCDMA : B1/ 5/ 8 | |
GSM / EDGE : B3/ 8 | |
Wi - Fi | 802.11b/g/n |
storage | |
TF storage card | l TF Card *2 (maximum supported 2 TB ） |
l patent DXR Stream storage format | |
Audio / Video | |
Audio and video input | l Host comes with 1 Channel Audio MIC |
l common 4 Video input: 【default】 | |
No. 1 Road: Front-facing camera built into the host; supports wide dynamic range and starlight level No. 2 Road: host built-in internal camera; with IR - CUT Infrared fill light | |
【Extension】 | |
No. 3 Road: Optional, use camera AHD Standard; installed in the rear compartment or in the vehicle blind spot No. 4 Road: Optional, use camera AHD Standard; installed at the rear or side of the vehicle | |
Storage resolution | Maximum Capacity: |
1 Channel : 1080P@25 fps | |
2 Channel : 720P@25 fps | |
3 Channel: 720P@25 fps | |
4 Channel: 720P@25 fps | |
Recommended configuration: | |
Main stream 1080P@15 fps ( ADAS ) + 720P@15 fps ( DMS ) + 720P@15 fps ( AHD ) + 720P@15 fps ( AHD ) | |
Substream D1@15fps ( ADAS ) + D1@15fps ( DMS ) + D1 @15fps ( AHD ) + D1@15fps ( AHD ) | |
Video Output | l Optional video installation cable, including 1 Channel video output |
l Output Format: AHD | |
l Can connect to an external monitor to view real-time video | |
Video Encoding | Optional: H.264 and H.265 |
Default: H.264 | |
Audio Coding | Optional: G.711A 、 G711U 、 G726 、 AMR |
Default: G.711A | |
CBR/VBR | Optional: CBR and VBR |
Default: CBR | |
Parameters of the host's built-in front-facing camera | |
Option 1 | |
sensor type | IMX 335 (Sony) 500 10,000 ( 4:3 ) 1/2.8 |
Lenses | l Focal length: 2.9 mm |
l HFOV: 106 ° ; VFOV: 77 ° ; DFOV: 139 ° ; Error : ± 5 ° | |
Resolution | Highest support 2560*1920P |
Wide dynamic range | support |
Starlight | support |
Option II | |
sensor type | SC 200 AI ( Smartsens ) 200 10,000 ( 16:9 ) 1/2.8 |
Lenses | l Focal length: 2.9 mm |
l HFOV: 115 ° ; VFOV: 61 ° ; DFOV: 137 ° ; Error : ± 5 ° | |
Resolution | Highest support 1920*1080P |
Wide dynamic range | support |
Starlight | support |
third solution | |
sensor type | GC 2053 200 10,000 ( 16:9 ) 1/2.9 |
Lenses | l Focal length: 2.9 mm |
l HFOV: 112 ° ; VFOV: 77 ° ; DFOV: 139 ° ; Error : ± 5 ° | |
Resolution | Highest support 1920*1080P |
Wide dynamic range | not support |
Starlight | support |
Parameters of the internal camera built into the host | |
sensor type | GC 2083 200 Ten thousand ( 16:9 ) 1/3 |
Lenses | l Focal length: 2.0 mm |
l HFOV: 152 ° ; VFOV: 84 ° ; DFOV: 180 ° ; error : ± 5 ° | |
Signal-to-Noise Ratio | 37 dB |
Sensitivity | 3240 Mv / lux.s |
Resolution | Standard 1280*720P (optional 1080P ） |
sensor | |
Six-axis acceleration sensor | l Linear acceleration axis: X , Y , Z |
l Angular velocity axes: Yaw , Pitch , Roll | |
interface | |
USB | micro 5 Pin USB *1 |
I/O | l 6 Input ( ACC , Emergency, Turn left, right, 2 Road reserved) |
l Left and right turn: | |
(1) Configurable high input / low input valid ( through software APP Configuration) | |
(2) High level effective voltage: greater than 6.5V Low level effective voltage: less than 1.0V | |
(3) Current: greater than 0.1 mA | |
(4) Protection: Pressure resistance 60V Short circuit protection | |
SIM Booth | Micro SIM |
TF Booth | 2 indivual |
RS 232 | 1 indivual |
Button indicator light | |||
Reset button | Press 3 Seconds reset | ||
3 Single color indicator light | |||
Indicator Lights | Device Icons | Light status description | |
online |
| Green light: Successful launch | |
Light off: Not online | |||
position |
| Green light: Positioning successful | |
Indicator Lights | Light off: Not positioned | ||
Video |
| Green light: Normal recording | |
Light off: Video recording abnormality | |||
Alarm key function | Standard emergency alarm connector | ||
position | |
GNSS | l P1311 |
l Support: Beidou / GPS | |
l Support single Beidou | |
Power supply related | |
Operating Voltage | l Original car battery: 12V/24V (adaptive) |
l Operating voltage range: 8V~36V | |
Super capacitor | Built-in supercapacitor, the front-facing camera supports continuous recording after the host loses power 1 Second Purpose: To avoid abnormal power outages that may cause data loss and equipment damage |
Power consumption | To be determined |
environment | |
Operating temperature | -30 ℃ ~80 ℃ |
storage temperature | -40 ℃ ~80 ℃ |
Working humidity | 15%~95% Non-condensing |
Storage humidity | 15%~95% Non-condensing |
Protection level | IP30 |
size and weight | |
size(Length * Width * Height) | 111.9 mm *67.4 mm *32.9 mm |
(Only the middle part of the main unit, excluding the top mounting bracket and the inner camera below) Error: ±1 mm | |
weight | Net weight (main unit only ): 316g Error: ±10g |
*Actual size and weight may vary due to individual product differences, manufacturing processes and testing methods. | |
Package Contents | Standard configuration: host, adapter cable, extension cable, emergency alarm button, installation wrench |
Optional: Video installation line, AHD Camera, external monitor, OBD Connector wire | |
5. Product Structure Diagram
5.1 Product appearance size
5.2 Indicator light /MIC
5.3 TF Card /SIM Card /USB Location / Button
6. Product Wiring Diagram
6.1 Cable wiring diagram
Frequently Asked Questions (FAQ)
What is a dual-facing AI dash cam?
It features both a road-facing and a driver-facing camera, offering full coverage of internal and external environments for enhanced visibility and safety.
What are the key functions?
1. Dual HD recording
2. Night vision capability
3. Live video streaming and audio recording
4. AI detection of fatigue, distraction, speeding, seatbelt violations, etc.
5. Cloud management and remote access
6. Quick installation and system integration
How long does installation take?
Thanks to plug-and-play design, installation takes approximately 15 minutes.
Does it support live video streaming?
Yes. It supports 1080p HD real-time video streaming for better management and emergency response.
Can it record clearly at night?
Absolutely. Equipped with infrared technology and digital WDR, it captures clear footage even in low-light or nighttime conditions.
How can I access recorded videos?
Videos can be accessed via the camera interface or remotely through the YUWEI cloud platform.
Is it compatible with existing fleet systems?
Yes. It supports seamless integration with most mainstream fleet management systems for unified data sharing and centralized control.
Email:hello@yuweitek.com
