Dash Cam with Hardwire Kit

Dash Cam with Hardwire Kit 2026

The hardwire kit is a dedicated power supply accessory for dash cams. It connects directly to the vehicle's electrical circuit, replacing the traditional cigarette lighter power supply. It enables stable power delivery and concealed wiring, and is essential for unlocking advanced features such as parking monitoring. Without a hardwire kit, the dash cam cannot reach its full performance potential.

Working Principle of Hardwire Kit Wiring

The hardwire kit adopts a professional three-wire design with a clear division of labor, balancing functionality with vehicle safety:

1.Red Wire (Constant Power/Battery): Provides continuous power, offering a stable power source for the parking monitoring function.

2.Black Wire (Ground): Grounds the circuit to ensure the safety of the vehicle's electrical system and prevent electrical leakage faults.

3.Yellow Wire (ACC Control): Connects to the ignition fuse. It automatically cuts off the long-term power supply when the vehicle engine is turned off to prevent battery drainage; it automatically turns on the device upon ignition and switches to parking monitoring mode upon engine shutdown.

The kit features a built-in voltage regulator that converts the vehicle's voltage to the appropriate voltage for the dash cam, preventing equipment damage caused by voltage instability.

Advantages of Using a Hardwire Kit

Commercial Advantages for Fleets

1.Uninterrupted Recording: Continuously captures key risk events such as collisions, glass breakage, rapid acceleration, and sudden braking, preserving video evidence.

2.4G Network & GPS Positioning: Supports real-time video transmission, route playback, overspeed warnings, and geofence management.

3.AI Smart Safety Algorithms: Equipped with ADAS (Advanced Driver Assistance Systems) and DSM (Driver Status Monitor) with a warning accuracy exceeding 98%, effectively mitigating driving risks.

4.Remote Fleet Management: Supports OTA (Over-the-Air) remote upgrades, self-diagnostic checks, and two-way intercom, significantly reducing fleet operation and maintenance costs and difficulties.

Adaptation Key Points for Dash Cam Hardwire Kits

The YUWEI V5 is a multi-channel smart dash cam built specifically for fleet scenarios, including models such as V5, V5C, and V5N. It must be paired with the YUWEI original dedicated hardwire kit; standard step-down cables cannot be used interchangeably.

Hardware Interface and Voltage Adaptation

The device utilizes an exclusive 4-pin/5-pin aviation connector, offering stronger adaptability than a standard USB interface. It supports 12V/24V wide voltage self-adaptation, covering the vast majority of vehicle types, including private cars, trucks, passenger buses, and construction vehicles. It delivers a stable 5V/2A current output, capable of simultaneously supporting multi-lens recording, 4G networking, and AI algorithm execution.

Smart Power Protection Specifications

The V5 dedicated hardwire kit is equipped with a fleet-grade smart power management module, optimized for long-term parking monitoring scenarios:

• Smart Low-Voltage Protection: Automatically identifies the threshold power-off voltage for 12V/24V vehicles, thoroughly preventing battery drain.

• Ultra-Low Standby Power Consumption: Static current after engine shutdown is ≤3mA, consuming almost no power during extended parking periods.

• All-Dimensional Protection: Supports protection against overvoltage, reverse connection, short circuits, and static electricity (6KV contact, 10KV air discharge).

• Wide Temperature Operation: Adapted for harsh environments from -20℃ to 70℃, withstanding extreme high and low-temperature operating conditions.

Fuse and Power Supply Specifications

The kit comes standard with ATC, Mini, and Micro2 multi-specification non-destructive fuse taps, adapting to the fuse boxes of mainstream global vehicle models. It utilizes a dual-path power supply scheme (ACC + Constant Power): the ACC controls the device's start/stop, while constant power ensures the continuous operation of parking monitoring. It includes a standard 5A dedicated fuse, precisely matching the device's 500mA–1A working current. Connecting to core safety circuits such as airbags or ABS is strictly prohibited.

Fleet Large-Scale Deployment Requirements

Comes standard with 5 meters of high-temperature flame-retardant wiring, fulfilling the concealed routing needs of large vehicles. Wiring must bypass airbags, steering mechanisms, and moving parts, and must be secured with clips throughout to prevent wear, abnormal noise, and circuit faults. The V5 supports synchronized recording of 1 channel of 1080P front camera + 3 channels of 720P cameras. The hardwire power supply provides sufficient current bandwidth to guarantee the device remains online via 4G for 24 hours, stably executing cloud functions such as remote preview, route playback, and AI risk warning uploads.

Standardized Installation Process for Hardwire Kit

Pre-Installation Preparation

Prepare tools such as a multimeter, plastic pry bar, zip ties, and electrical tape. Disconnect the negative terminal of the vehicle's battery before installation to avoid short-circuit risks. Locate the fuse box and clearly distinguish between the ACC ignition power and the vehicle's constant power interface.

Detailed Installation Steps

Step 1: Select Safe Power Interfaces
Prioritize using the cigarette lighter, car power supply, or radio ACC fuse, which only supply power upon ignition to avoid power consumption after engine shutdown. The constant power interface is strictly used for parking monitoring and must be used in conjunction with low-voltage protection.

Step 2: Non-Destructive Wiring and Power Supply
Use fuse taps for a non-destructive installation, integrating both the original vehicle fuse and the device's dedicated fuse. Connect the red wire to constant power, the yellow wire to ACC, and securely attach the black wire to a metal grounding point on the vehicle body.

Step 3: Concealed Wiring
Route the wiring harness along the A-pillar, roof interior, and door weatherstripping, avoiding moving and high-temperature components. Secure the wiring with zip ties throughout the route to achieve a clean and hidden installation.

Step 4: Power-On Function Testing
Restore battery power. Test if the device automatically powers on upon ignition and automatically enters parking monitoring upon engine shutdown. Confirm that video recording is functioning normally and that the original vehicle electronics display no fault errors. The installation is complete.

Installation Taboos and Common Issue Prevention

Safe Installation Guidelines

Do not alter the vehicle's core electrical circuits or overload the power supply. All connection points must be fully wrapped with electrical insulation. Keep the wiring harness strictly away from high-temperature and rotating parts. If you lack installation experience, professional installation at a service center is highly recommended to avoid voiding the vehicle's warranty.

Common Fault Prevention

When enabling parking monitoring, you must activate the low-voltage protection feature to prevent battery depletion. Double-check the wiring sequence for ACC and constant power during installation to avoid functional failure. Ensure the wiring harness is firmly secured throughout to eliminate any rattling noise while driving. Keep the wiring away from in-vehicle electronic control equipment to prevent electromagnetic interference from degrading video quality.

YUWEI V5 Fleet Edition Extended Features

1.Four-Channel Panoramic Recording: Supports the simultaneous connection of four cameras, covering the front, interior, and sides of the vehicle to provide all-around monitoring of vehicle operational status.

2.AI Intelligent Recognition Management: Features built-in facial recognition, mask detection, and passenger counting functionalities, perfectly meeting the compliance management needs of ride-hailing, passenger transport, and logistics fleets.

3.Cloud Remote Management: Automatically archives abnormal event videos in the cloud. Supports remote viewing, downloading, and traceability for evidence collection, drastically improving fleet management efficiency.

4.International Compliance Certifications: Holds multiple certifications including CE, FCC, UKCA, and NBTC, fully aligning with domestic and international compliance operating standards for commercial vehicles.

Email:hello@yuweitek.com