Mining Car DVR Camera System

Mining Car DVR Camera Systems

The F6 AI Mobile DVR features real-time fault tracking, remote parameter querying, and other intelligent operation and maintenance functions for terminal devices. It is a cost-effective visual intelligent terminal that integrates satellite positioning, video surveillance, and AI intelligent algorithms.

Mining Car DVR Functions:

- Face Recognition: Identifies individuals in the vehicle.

- DMS Driver Monitoring: Detects fatigue (e.g., closed eyes, yawning), distractions (e.g., sunglasses, smoking, phone use), and safety violations (e.g., seatbelt, helmet).

- BSD Pedestrian/Vehicle Blind Spot Detection: Uses AI to monitor blind spots.

- 360° AVM Panorama: Supports 4-way or 6-way panoramic stitching for a complete view of the vehicle's surroundings.

- Infrared Thermal Imaging: Covers the vehicle’s surrounding environment and blind spots.

- BSD Early Warning System: Alerts with voice notifications when pedestrians or obstacles are detected in the vehicle’s alarm zone.

- Camera Inputs: Supports up to 8 camera inputs, providing full vehicle coverage.

Vehicle Networking Functions:

- CAN Information: Collects and processes data from the vehicle's CAN bus.

- GPS Positioning: Tracks vehicle location, speed, load, mileage, and operational statistics.

Mining Car DVR Features:

- 360° AVM Panorama: Fully customizable development.

- AI Functionality: Includes features like face recognition, DMS (fatigue detection, distraction, abnormal behavior, seatbelt and helmet recognition), and 4-way BSD blind spot monitoring.

- Dual-Mode Positioning: Supports both BDS/GPS high-precision positioning and electronic fencing.

- Wireless Module: 4G full network support, with expandable 5G, WIFI 4/6, and Bluetooth.

- Power Supply: Can accept 9V~36V low voltage or 40~120V high-voltage input, with protections against under-voltage, short-circuit, and reverse connections. Also supports intelligent power management for automatic shutdown when battery is low.

- Video: Supports 8-channel AHD video inputs (1080P/720P) and offers multiple video outputs including HDMI.

- Data Storage: Includes a TF card slot (up to 512GB) for H.264/H.265 encoding and has a built-in super capacitor to prevent data loss during unexpected power failure.

- Communication Interfaces: Includes IO signals, Ethernet, RS485, RS232, USB2.0/USB3.0, CAN, and external connections for fuel level, weighing sensors, and vehicle data.

- Voice Alarm: Can connect to external speakers or alarms for audio and visual alerts.

- Real-time Fault Tracking: Tracks device faults and allows for remote parameter querying and setting.

- Built-in G-Sensor: Monitors vehicle status and provides alarms for sudden acceleration, deceleration, sharp turns, rollover, and collision.

- OTA Upgrade and Parameter Distribution: Supports over-the-air upgrades and parameter distribution remotely.

Product Technical Specifications:

- Video Input/Output:

- Video Format: PAL/NTSC

- Image Compression Standard: H.264/H.265 (1–30 frames per second)

- Video Input: 8 channels of AHD video (M12-4 aviation connectors), DMS 720P

- Video Output: 1 HD AHD/CVBS output, 1 HDMI output

- Resolution: 720P/1080P (selectable), main stream recording, sub-stream for 4G/WIFI transmission

- Audio Input/Output:

- Audio Input: 1 channel DSM or microphone input

- Audio Output: 1 channel audio output

- Recording:

- Storage Medium: TF card (up to 512GB) with shockproof design

- Playback: Local playback and PC-side analysis software for playback

- Satellite Positioning:

- GPS/Beidou: Dual-mode GPS/Beidou positioning support

- Communication Module:

- 4G: Full network, expandable 5G

- Gyroscope (G-Sensor):

- Internal 6-axis sensor for collecting vehicle status information

- Vehicle Control:

- Relay Output: 1 channel (normally open/closed), controls ignition ACC, supports 9–120V voltage, 16A current

- Power Consumption:

- Power Input: DC 9V–36V (low voltage) or 36V–120V (high voltage)

- Power Output: 12V/200mA and 5V/500mA external power supply for devices

- Main Unit Power Consumption: Less than 12W

- Physical Interfaces:

- 3 IO signal inputs, 3 IO outputs

- 2 RS232, 2 RS485, 1 Ethernet, 1 USB2.0, 1 USB3.0, 1 CAN interface

- 8 AHD video inputs

- External Speaker Interface: 1 external speaker interface, supports external visual/audio alarm

- Operating Environment:

- Temperature: -30°C to +75°C

- Humidity: 20%–90% RH

- Software Upgrade:

- Local USB/TF card upgrade support

- OTA remote upgrade support

- Parameter Distribution:

- Remote parameter distribution support

Email:hello@yuweitek.com