Fleet Management Systems Sydney

Sydney Fleet Management Systems

According to the 2024 data from Transport for New South Wales (TfNSW), Sydney has 48,600 registered commercial vehicles, covering 12 categories, including dump trucks (12,000), school buses (8,500), taxis (5,200), etc. However, the industry faces three major challenges:

Significant Safety Risks

1. Blind spot accidents of dump trucks during right turns

Account for 63% of annual commercial vehicle accidents (Sydney Accident Report 2023).

Solution:Deploy BSD blind spot cameras + ADAS alert system, achieving 98.7% pedestrian detection accuracywithin a 12-meter right-side blind zone.

2. Children left inside school buses

Annual increase of 27% (Sydney Education Department).

Solution:Integrate 360° surround-view cameras + facial recognition terminalswith a parent-end Appfor real-time stop notifications (error < 30 seconds).

Low Operational Efficiency

1. Idle rate of logistics fleets: Up to 25% under traditional dispatch methods.

Solution:Implement GPS + BeiDou dual-mode positioning + AI route planning, reducing idle rate by 18%.

2. Taxi detour complaints: Up to 19% during peak hours (Consumer Council data).

Solution:Use geofencing + AI behavior analysis, linking fare meters with GPS data to reduce complaints to zero.

High Compliance Costs

1. Fines for speeding/illegal parking: Average $24 million annually (TfNSW data).

Solution:Deploy geofencing + 4G real-time transmission modulesto automatically trigger cloud alerts for violations.

2. Insurance fraud risk: Annual growth rate of 18%.

Solution:Accident videos can be uploaded to the cloud with one click, providing indisputable evidence for third-party liability assessment.

YUWEI Intelligent Fleet Management System Architecture

1. Hardware Configuration

①　ADAS Camera:Forward collision warning, lane departure warning, speed limit sign recognition.

②　DSM Camera:Driver facial recognition, fatigue monitoring, distraction detection (smoking, phone use, seatbelt monitoring).

③　BSD Blind Spot Camera:12-meter right-side coverage, pedestrian/obstacle detection.

④　HOD Head-Up Display:Real-time display of speed and alerts to reduce driver distraction.

⑤　GPS/BDS Terminal:Sub-meter positioning, supports geofencing and historical route playback.

⑥　4G Transmission Module:Real-time data upload to cloud, supports offline continuation.

⑦　Fuel/Temperature Sensor:Monitors abnormal fuel consumption, engine overheating.

⑧　Event Recorder:1080P HD video, supports audio recording and photo capture.

2. Core Software Features

AI Visual Hub:

①　Recognizes 8 types of dangerous driving behaviors (e.g., yawning, smoking).

②　Night-time recognition accuracy > 92% (industry-leading F1 score).

Edge Computing:

①　Onboard real-time video stream processing, reducing bandwidth usage by 60%.

②　Offline continuation ensures data integrity.

3. Fleet Monitoring Solutions by Vehicle Type

School Bus

①　Core Hardware: GPS/BDS, ADAS, DSM, HOD (optional), front & rear cameras (optional), facial recognition module, vehicle status collector.

②　Additional Hardware: Right blind spot camera, interior cameras, GPS antenna, 4G module.

③　Software: Real-time positioning, overspeed/overload alerts, fatigue detection, video storage/playback, geofence management.

④　Certification: CE/FCC/UKCA, supports CAN bus protocol.

Taxi

①　Core Hardware: 4G/5G module, ADAS, DSM, HOD, GPS/BDS, interior camera, e-payment terminal.

②　Additional Hardware: DVR, license plate recognition camera, emergency button, passenger feedback terminal.

③　Software: Real-time dispatch, e-invoice generation, service rating, one-click alarm linkage, driver behavior analysis.

④　Certification: Dual TF card storage, ISO 9001/14001 certified.

Coach

①　Core Hardware: ADAS, DSM, HOD, BSD blind spot monitoring, multi-camera (front/rear + blind spot), onboard display.

②　Additional Hardware: 360° surround cameras, tire pressure sensors, engine status module.

③　Software: Dynamic route planning, driver authentication, hazardous road alerts, cloud video storage, time-based reports.

④　Certification: Multi-language interface, compliant with satellite positioning system standards.

Dump Truck

①　Core Hardware: ADAS, DSM, HOD, right blind spot camera, sealed detection sensor, GPS, LED display.

②　Additional Hardware: Tipping monitoring camera, overload pressure sensor, geofencing, tamper alarm.

③　Software: Vehicle locking control, illegal tipping alert, container seal monitoring, real-time video evidence, environmental compliance.

④　Certification: IP67 waterproof/dustproof, dual GPS+BeiDou support.

Sanitation Truck

①　Core Hardware: GPS/BDS, ADAS, DSM, rear & waterproof cameras, mobile DVR, onboard intercom.

②　Additional Hardware: High-pressure wash sensor, trash full sensor, night IR camera.

③　Software: Operation replay, violation alerts, sanitation quality evaluation, remote device reboot, fuel anomaly monitoring.

④　Certification: Low-light monitoring, compliant with city sanitation regulations.

Concrete Mixer

①　Core Hardware: GPS, ADAS, BSM blind spot monitoring, 360° surround cameras, DVR, container sensors.

②　Additional Hardware: Concrete level sensor, anti-theft device, discharge monitoring camera, emergency shutdown.

③　Software: Overspeed alerts, route deviation warning, container not sealed alert, illegal discharge detection, vehicle utilization analysis.

④　Certification: Corrosion-resistant design, supports multi-axis vibration monitoring.

Mining Vehicle

①　Core Hardware: 360° surround cameras, millimeter-wave radar, ADAS, DSM, HOD, explosion-proof cameras, 9-inch display.

②　Additional Hardware: Reverse radar, side cameras, rollover sensors, high-intensity lights, remote diagnostics.

③　Software: Collision warning, blind spot pedestrian detection, driver scoring, high-temperature testing, mining environment adaptation.

④　Certification: Explosion-proof (Ex d IIB T4), extreme temperature support (-40℃~85℃).

4. Key Hardware Notes

1. ADAS:Standard across all fleets (forward collision, lane departure, distance monitoring).

2. DSM:Focused on passenger transport vehicles (school buses, coaches, dump trucks) for fatigue and distraction detection.

3. HOD:Mainly for coaches and mining vehicles, projects speed and alerts onto the windshield.

4. Blind Spot Monitoring (BSD/BSM):Mandatory for dump and mining trucks; optional for school buses.

5. Data Storage & Transmission:Mobile DVR standard for taxis and sanitation trucks; school buses/coaches use local storage + scheduled uploads.

All devices are CE/FCC/ROHS certifiedand support GPS + BDS dual-mode positioning. Hardware combinations can be customized, e.g., cold chain logistics can add temperature/humidity sensors, hazardous materials transport can include gas leak detection modules.

Email:hello@yuweitek.com