AI Dash Cams and Vehicle Telematics
AI Dash Cam and Vehicle Telematics
The intelligent dash cam utilizes a high-performance image processing chip and LINUX operating system, supporting 2-way active safety ADAS and DSM algorithm detection, and 2-way adaptive 1080P/720P/D1 AHD cameras. It meets explosion-proof certification, FCC, and CE standards, and features real-time fault tracking, vehicle telematics, and remote parameter query settings. It is a cost-effective intelligent vehicle terminal integrating GPS/BDS satellite positioning, video surveillance, and active safety.
AI Dash Cam Specifications
Parameter classification | Parameter item | Details | Remark |
Basic parameters | Appearance | device integrate with ADAS cam | |
Product Type | 4G DVR Car Video Terminal | ||
network standard | 4G Global Band | ||
Memory | 256MB(Flash)+1GB(DDR) | ||
Front camera | 1080P, MIPI Camera, H:112°V:55° | ||
In-car camera | AHD 720P, with light sensor/infrared night vision, | ||
AHD Camera, single pass, infrared night vision, H=60° V=42° | |||
4th Channel camera | AHD 720P | ||
Hardware function
| GPS | Support: GPS+BDS | |
Wi-Fi | 802.11b/g/n | ||
trumpet | 8 ohms 1.5 watts, 1 channel, with sound cavity | ||
MIC | Built-in dual silicon microphone design | ||
Accelerometer | 3-axis accelerometer | ||
Interface | micro 5Pin USB | USB×1, data interface | |
BMW connector | Power+/GND ACC Left turning signal cable Right turning signal cable SOS Cable (Panic button) | ||
RS232 | 1*RS232 | ||
SIM card holder | Micro SIM | ||
TF card holder | TF×2 (Card 1 and Card 2 support circular storage) | ||
Power supply | Power supply | 12V/24V power supply | |
Button& Indicator light
| Reset button | Long press the power button for 8 seconds to reset | |
indicator light | 2-color indicator | ||
Alarm key | Standard emergency alarm connector | ||
Antenna
| GPS Antenna | Built-in ceramic antenna | |
4G antenna | Built-in FPC+IPEX transposon | ||
WIFI antenna | Built-in FPC+IPEX transposon | ||
Memory card | 4G～2TB, patented DXR streaming storage format | ||
Electrical Specification | Operating temp. | -20℃～70℃ | |
Storage temp. | -40℃～85℃ | ||
Static Protection | 6KV contact, 10KV air | ||
Vibration test | Car vibration | ||
Current consumption | When the working voltage is 12V, the current is from 500mA to 1A (depending on whether the algorithm is turned on, etc.) When ACC OFF: ≤3mA | ||
Other quality requirements | According to JT/T794 standard (including hard test, soft test, reliability, quality, etc.) | ||
Product specification pictures:
hnweb_
l Red light
Equipment situation | Light status |
Before the program is ready | Solid on |
during upgrade | On for 1 second, off for 4 seconds |
update completed | |
camera lost | On for 0.1 seconds, off for 0.1 seconds, flashing 4 times at a time, flashing once every 4 seconds |
SIM card missed | On for 1 second, off for 1 second |
other status | Always off |
l Green light
Equipment situation | light status |
Before the program is ready | Solid on |
during upgrade | On for 1 second, off for 4 seconds |
update completed | |
The card is recording normally | On for 1 second, off for 1 second |
Unrecorded card abnormal | On for 0.1 seconds, off for 0.1 seconds, flashing 4 times at a time, flashing once every 4 seconds |
other status | Always bright |
TF card/SIM card/USB location
Powerful Functions
- Industry-leading ADAS and DSM active safety algorithms, with ADAS alarm accuracy over 99% and DSM alarm accuracy over 95%.
- Supports 4 cameras, including ADAS and DSM.
- Single-board design with high integration and long lifespan.
- Expandable, with rich interfaces (RS485, RS432, CAN bus) to support various peripherals such as oil and temperature sensors.
- Extendable blind spot systems with cameras, ultrasonic, and millimeter-wave radar.
Easy Management for Fleet Managers
- Remote installation calibration via IVMS or APP, real-time viewing and modification of various settings (online platform, camera settings, vehicle and driver information, alarm settings, etc.).
- Intelligent self-check system, eliminating manual inspection. The device regularly self-checks its operating status, monitors faults, and reports specific issues to the backend, significantly reducing fault detection difficulty and improving maintenance efficiency.
- Smart backend maintenance platform for efficient batch equipment management.
Strong Compatibility with Multiple Platforms
- Supports various local standards for quick integration across different platforms.
More:4G Dash Cam | 4 Channel Car DVR | Vehicle Safety Monitoring System
