Which Professional-Grade DMS Camera is Better?
Core Product Advantages
(I) Core Value of YUWEI Y10A
YUWEI Y10A is a professional-grade DMS (Driver Monitoring System) camera specifically designed for commercial vehicles, with the following core values:
① Seamless integration capability: It can perfectly adapt to YUWEI dashcams and MDVR (Mobile Digital Video Recorder) systems without additional debugging, reducing equipment compatibility costs.
② Real-time status detection: It accurately identifies dangerous behaviors of drivers, such as fatigued driving, distracted attention, and mobile phone use, and helps avoid safety risks through real-time reminders.
③ Compliance guarantee: It complies with global fleet safety standards, providing compliance support for commercial vehicle operations and reducing penalties caused by non-compliant operations.
hnweb_
Introduction to YUWEI DSM Camera Y10A
Developed by YUWEI based on image recognition technology, the DSM Camera Y10A is also positioned as a professional-grade AI-driven DMS device. Its core advantages can serve as a reference for model selection:
① Algorithm independence: Equipped with an independently developed advanced core algorithm for intelligent image processing, it can independently complete driver status monitoring and early warning without relying on external algorithm modules.
② Multi-scenario adaptability: It supports adaptive 3D digital noise reduction technology, which can maintain image clarity in complex lighting environments (such as backlight and low light) and adapt to algorithm scenarios of various vehicle models.
③ Environmental adaptability: It has a wide operating temperature range of -20℃～70℃, and its high-temperature resistance is suitable for the internal installation environment of automobiles. At the same time, it supports DC 9-16V wide-voltage power supply, adapting to the power supply systems of different vehicle models.
④ Installation flexibility: It provides two installation methods: 3M adhesive bonding and screw fixing. The lens pitch angle is adjustable and lockable, and it is equipped with a dedicated L-shaped hexagon screwdriver, facilitating later angle fine-tuning.
Comparison of Key Technical Parameters
Parameter Category | BSJ-V03DS | YUWEI DSM Camera Y10A |
Image Sensor | Not mentioned | 1/3" CMOS (some models include GC1054 1/4-inch sensor) |
Connector | 5-pin interface | BMW connector (extension cable includes BMW head to aviation head) |
Focal Length | 6.0 mm | 3.9 mm |
Horizontal Field of View | Not mentioned | 72° |
Depth of Field | Not mentioned | 200cm～∞ |
Resolution | 1280×720 (720P) | 1280 (H)×720 (V) (1-megapixel) |
Video Output | Not mentioned | AHD high-definition output (720P) |
Frame Rate | 25 FPS | 25fps |
Image Mode | Monochrome (black and white) | PAL system (black and white) |
Lens Composition | 4G + 940nm infrared lens | Not mentioned (effective infrared distance is 2 meters, no IR-CUT) |
Minimum Illumination | Not mentioned | 0.1Lux/F1.2 (adaptability to low-light environments) |
Operating Temperature | Not mentioned | -20℃～70℃ (operating); -30℃～80℃ (storage) |
Operating Humidity | Not mentioned | Relative humidity ≤90% |
Power Supply and Current | Not mentioned | DC 12V (±20%), operating current 95mA (±10mA) |
Included Accessories | Not mentioned | 1 camera + 1 3-meter extension cable + 4 18mm self-tapping screws + 1 L-shaped hexagon screwdriver |
Function and Application Scenario Expansion
(I) Comparison of Driver Behavior Detection Functions
Detection Type | BSJ-V03DS | YUWEI DSM Camera Y10A |
Fatigued Driving Detection | Supported | Supported |
Distracted Attention Detection | Supported | Supported |
Mobile Phone Use Detection | Supported | Supported (classified under call/handheld device detection) |
Smoking Detection | Not mentioned | Supported |
Unfastened Seatbelt Detection | Not mentioned | Supported (HOD-seat belt detection) |
Mask Wearing Detection | Not mentioned | Supported (triggered by EVT_MOUTH_MASKED event) |
Abnormal Status Detection | Not mentioned | Supported (including unknown abnormal behavior recognition) |
(II) Installation Process (Taking YUWEI Y10A as an Example)
① Pre-connection test: First, connect the camera to terminal equipment (such as MDVR) to confirm normal image collection and avoid rework due to equipment failure after installation.
② Position and angle calibration: Place the camera at the target installation position (such as next to the interior rearview mirror), adjust the lens pitch angle to ensure that the driver's face and upper body can be fully captured, and record the current installation position and calibration parameters.
③ Angle locking: Use a hexagon screwdriver to tighten the hexagon socket screw at the lens angle adjustment part to fix the current pitch angle and prevent angle deviation during vehicle driving.
④ Fixed installation: Tear off the protective film of the 3M adhesive at the bottom of the camera, paste it according to the recorded position, and reinforce it with self-tapping screws (it is recommended to choose a stable part of the vehicle body to avoid falling off due to vibration).
⑤ Secondary debugging: After installation, check whether the vertical angle of the camera is deviated. If there is deviation, repeat steps 2-4 for fine-tuning to ensure that the detection area is not blocked.
(III) Supporting Systems and Data Management
1. YUWEI Y10A + MDVR Terminal
Y10A can be matched with MDVR and dash cam to build a full-process monitoring system, with core functions including:
① 1×1080P + 3×720P multi-channel input to achieve blind-spot-free monitoring of the entire vehicle.
② 4G video stream + GPS tracking, supporting real-time preview and route playback.
③ Dual TF card redundant storage (maximum 512GB per card) + built-in backup battery to ensure data security.
④ Integration of ADAS and DSM algorithms, which automatically upload alarms when risks are triggered.
⑤ Local triggering of voice safety warnings to remind drivers in a timely manner.
⑥ Synchronous reporting of event data to the management platform (including time, location, and behavior type, such as EVT_CALL call event and EVT_BELT unfastened seatbelt event), facilitating remote supervision of the fleet.
⑦ No built-in audio collection module; an external microphone is required for audio recording.
Model Selection Suggestions and Contact Information
(I) Model Selection Reference Dimensions
① Function priority: If functions such as mask wearing detection and smoking detection are required, and emphasis is placed on seamless integration with the MDVR system and full-vehicle monitoring, YUWEI Y10A is more suitable.
② Installation environment: For high-temperature areas, it is recommended to first confirm the upper limit of the equipment's operating temperature (both meet the conventional on-board environment, and YUWEI Y10A has a wider storage temperature range).
③ Power supply and interface: BSJ-V03DS is suitable for equipment with 5-pin interfaces, and YUWEI Y10A is suitable for BMW interfaces. Selection should be based on the interface type of existing terminals to avoid additional adapter costs.
④
Welcome to contact us for the price of Y10A DSM camera: hello@yuweitek.com
